Ozone generators designed primarily for applications in odor elimination in hydroponic crops, odors in air extraction / intraction ducts and treatment and improvement of air in air conditioning ducts (sick building syndrome).

Designed for odor reduction in extraction ducts of simple installation.

The equipment is tubular with the appropriate diameters depending on your needs (from 125 to 315 mm) to simplify its installation, placing it after the extractor. Connecting it to the mains (230V) will illuminate the pilot indicating the production of ozone (O3).

In the box you will find accessories for installation, connector cable with plug and chain to hang it. If they have an activated carbon filter it is recommended to keep it for the containment of solid particles.

Place the Steril Tube after the extractor, after its installation, ensure that the duct is as long as possible, at least 2-3 meters to the exit. The longer the duct travel from Steril Tube to the exit, the better results are obtained.

These equipments do not require any type of recharge, just clean the producing tubes and their stainless steel meshes every 6 months of use approximately.

The King Ozone 315mm / 10G Steril Tube duct ozonator is equipped with 2 Long Life ozone lamps, other than the "T" range, because in these models, these lamps are 60 mm in diameter and their operation is through discharges of high frequency

- Ozone production 15,000 mg / h
- Max flow: 8000 m3 / h.
- Diameter: 315 mm
- 220-240V, 50-60Hz